[Crashxx]

While under our 22' SVR, I noticed this on the exhaust pipes. Is this how they come or has something dented mine?

There doesn't seem to be any clearance issues so I'm not sure why they would be like this.

 

[Melibokus]

I did get under mine to take a look but without a pit or up on ramps I did not see anything like this. How does it look from the other direction?

 

[Crashxx]

It looks the same either direction. I'll post a pic from the rear later today.

 

[Melibokus]

It looks the same either direction. I'll post a pic from the rear later today.

I really didn’t notice it from either direction, so from the rear will be much clearer. I’ll get you something to compare with once you’ve posted your pic.

 

[Crashxx]

Here it is from the rear. It a ways up under there.

 

[Melibokus]

That is a long way down, on the floor I'm going to need some external light. I tried taking the picture from the side at the mid point, see if this shows enough to verify what you are seeing. If not, I'll try harder.

 

[Crashxx]

Not quite, its a little further forward. Just in front of the part thats welded to both pipes.

 

[Melibokus]

Not quite, its a little further forward. Just in front of the part thats welded to both pipes.

What I’ve learned from this is the clearance is lower than I expected and I should stick to the mostly maintained dirt roads than some of the barely passable trailhead access roads we have around here. I’ll ditch the crawler and that should get me far enough under to get that photo.

 

[Crashxx]

I appreciate it. Thanks!

 

[Melibokus]

Finally have the pic, this was really hard to get to from the floor. It does look similar to your photo. Because of the body cover/plate I couldn't close enough to see and touch this, this is behind the rear wheels on a 3x optical zoom.

 

[Crashxx]

Well, that looks the same as mine. I guess that's how they're supposed to be. Thank you for checking. I appreciate it!