Jaguar F-Pace Forum banner
1 - 16 of 16 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter · #1 · (Edited)
Hey guys,
I want to retrofit ACC to my 2017 F-Pace.
I know its possible and I know what to do, but i still need the right part numbers.

what is needed:
  • Frontgrill with ACC and 360°camera
  • Frontbadge for ACC
  • ACC Sensor
  • ACC Holder
  • Steering wheel switch (Heated wheel + ACC)

Can anyone help me searching for the numbers?

Thanks
Tommy
 

·
Registered
Joined
·
77 Posts
Hey guys,
I want to retrofit ACC to my 21017 F-Pace.
I know its possible and I know what to do, but i still need the right part numbers.

what is needed:
  • Frontgrill with ACC and 360°camera
  • Frontbadge for ACC
  • ACC Sensor
  • ACC Holder
  • Steering wheel switch (Heated wheel + ACC)

Can anyone help me searching for the numbers?

Thanks
Tommy
This is possible, of course. But you are sure that you have a suitable ABS MODULE with ABS PUMP in the car?
73843
 

·
Registered
Joined
·
31 Posts
Discussion Starter · #3 ·
This is possible, of course. But you are sure that you have a suitable ABS MODULE with ABS PUMP in the car? View attachment 73843
Where did you get the picture from?
I found the wire of ACC is already pre-installed to my front bumper. So I thought the rest of the hardware, except the radar specific ones, are already installed, too.
 

·
Registered
Joined
·
77 Posts
Where did you get the picture from?
I found the wire of ACC is already pre-installed to my front bumper. So I thought the rest of the hardware, except the radar specific ones, are already installed, too.
The picture shows what I changed on my car to get a working ACC))
The wiring in the front bumper does not have a wire +)) but it helps anyway. Does your car have a front stereocamera?
 

·
Registered
Joined
·
31 Posts
Discussion Starter · #7 ·
I got an A so I'm out:(:cautious:

73844


If the upgrade has been only the sensor, grill, steering switch I would have done that project.
Coding is now problem for me. I did a lot of CCF editing the last month.
But i don't feel like sweaping the abs modul and adding wires for the acc sensor.
Thta would be too much expenditure for a feature I would use too less.
 

·
Registered
Joined
·
77 Posts
I got an A so I'm out:(:cautious:

View attachment 73844

If the upgrade has been only the sensor, grill, steering switch I would have done that project.
Coding is now problem for me. I did a lot of CCF editing the last month.
But i don't feel like sweaping the abs modul and adding wires for the acc sensor.
Thta would be too much expenditure for a feature I would use too less.
It's bad that the number is like this ... I had the same module. But I could not give up this expensive idea))
 

·
Registered
Joined
·
31 Posts
Discussion Starter · #15 ·
Some time has passed... And now, I really want to start my ACC project.

Because i have the wrong ABS pump, I need another, ACC-ready, one.
Can someone give me a part number for the module?

What else is needed?
ABS pump: ???
grill: HK838B271EA
badge for grill: FW9316B856BB ??
ACC sensor: GX739G768AD (are there different ones?)
sensor holder: HK839E729AD
steering switch: GX7313D767CD

Whats about the extra B+ cable for the Sensor? Is that a special one, or is it just a single cable to connect to ignition?
Is the existing ACC cable in the front already connected to the main unit?

Thanks for help.
Tommy
 
1 - 16 of 16 Posts
Top