Joined
·
1,284 Posts
I don't have an answer for you, but 4 years ago while out on a ride I got multiple cautions for no obvious reason:
1. Stability Control Not Available Drive With Care
2. AEB Not Available
3. Forward Alert Not Available
4. ASPC Not Available
I was unable to clear them while driving.
Stopped for lunch and of course they were all gone and haven't seen them since.
No idea what caused them or why they went away.
Go figure.
In your case, I might try turning the DSC on and off a few times and switching from DSC to TRACDSC a few times:
To switch the DSC system off, press and hold the DSC OFF button, located on the center console, for more than 3 seconds.
An audible warning tone sounds. The instrument panel temporarily displays the DSC OFF message and also illuminates the DSC OFF warning lamp to confirm that DSC is disabled.
To switch on the DSC system, press and release the DSC OFF button, located on the center console.
The instrument panel temporarily displays the DSC on message and also extinguishes the DSC OFF warning lamp to confirm that the DSC system is enabled.
To switch between DSC and TracDSC, press and hold the DSC OFF button, located on the center console, for less than 3 seconds.
The instrument panel temporarily displays the TracDSC or the DSC on message to confirm selection.
The instrument panel illuminates the DSC OFF warning lamp while TracDSC is enabled, to confirm that DSC is disabled.
The amber DSC warning lamp flashes when DSC or TracDSC activates
1. Stability Control Not Available Drive With Care
2. AEB Not Available
3. Forward Alert Not Available
4. ASPC Not Available
I was unable to clear them while driving.
Stopped for lunch and of course they were all gone and haven't seen them since.
No idea what caused them or why they went away.
Go figure.
In your case, I might try turning the DSC on and off a few times and switching from DSC to TRACDSC a few times:
To switch the DSC system off, press and hold the DSC OFF button, located on the center console, for more than 3 seconds.
An audible warning tone sounds. The instrument panel temporarily displays the DSC OFF message and also illuminates the DSC OFF warning lamp to confirm that DSC is disabled.
To switch on the DSC system, press and release the DSC OFF button, located on the center console.
The instrument panel temporarily displays the DSC on message and also extinguishes the DSC OFF warning lamp to confirm that the DSC system is enabled.
To switch between DSC and TracDSC, press and hold the DSC OFF button, located on the center console, for less than 3 seconds.
The instrument panel temporarily displays the TracDSC or the DSC on message to confirm selection.
The instrument panel illuminates the DSC OFF warning lamp while TracDSC is enabled, to confirm that DSC is disabled.
The amber DSC warning lamp flashes when DSC or TracDSC activates