Jaguar F-Pace Forum banner

How do I get my pops and crackles back?!

6650 Views 24 Replies 8 Participants Last post by  Mr DJ
Ok, so I had the original 2019 F-Pace SVR, that was sadly stolen and written off my some morons. The personality of that car when you had the loud button engaged was soooooo good, particularly lifting when in 2nd or 3rd; the pops and crackles have it amazing personality I loved.

Today I got my replacement 2021 - it’s lively to drive, yes they have refined it, BUT it has lost all of its personality that I loved my SVR for. Does anyone have any insights as to how I can get this remapped to the old mapping and (if it’s relevant) how do I get those amazing pops and crackles back? Jag have cut its nuts off, sadly.
Thank you!
21 - 25 of 25 Posts
Mr DJ, I searched for that post and have no luck finding it. I was going to repost it here. Hopefully, someone remembers the name of the thread and can do that. The connector you need to pull is on the driver side of the spare tire area under the spare tire and the tools carrier. It's also under the hard carpet that wraps around the corner. Didn't take pictures when I did it since there were pics in the original post. I'm pretty sure it was either here I found it or on the SVR Facebook Group.
Thank you, Sir. I just happen to have a lift in my garage for my C7 Corvette resting place, and to change oil on all of my cars; I will have a look-see...
MrDJ that is a sweet setup for sure. To be honest, pulling the cables at the back right at the back of the mufflers is not difficult, specially if you have access to a lift. You just need to go through he open the baffles procedure which is simply to turn the car on by pressing start and not putting your foot on the brake, so that the engine doesn't start. Then pressing the loud exhaust button to open the baffles that way, then pull the cables off the mufflers and you shoudl be golden and have a much louder exhaust setup.

You don't need a lift to get to the other spot I was talking about. Just need to pop the floor in the boot and remove the spare tire, tools carrier and such and lift the black little cardboard floor extension that angles down into the spare tire area. The cable is on a box there that you would pull. I think that box has 2 or 3 cables.

With a lift the connectors at the back of the mufflers will be easier to get to and easier to disconnect.
See less See more
MrDJ that is a sweet setup for sure. To be honest, pulling the cables at the back right at the back of the mufflers is not difficult, specially if you have access to a lift. You just need to go through he open the baffles procedure which is simply to turn the car on by pressing start and not putting your foot on the brake, so that the engine doesn't start. Then pressing the loud exhaust button to open the baffles that way, then pull the cables off the mufflers and you shoudl be golden and have a much louder exhaust setup.

You don't need a lift to get to the other spot I was talking about. Just need to pop the floor in the boot and remove the spare tire, tools carrier and such and lift the black little cardboard floor extension that angles down into the spare tire area. The cable is on a box there that you would pull. I think that box has 2 or 3 cables.

With a lift the connectors at the back of the mufflers will be easier to get to and easier to disconnect.
This is Awesome, FPace, I really appreciate your detailed instructions; I'll let you know, see, and hear the results once I make it happen. In the meantime, check this (4 of 7 rides):

  • Like
Reactions: 1
Mr DJ,

That is a lot more options than the normal person should have to drive! Nice Video and like the drag race at the end!
Mr DJ,

That is a lot more options than the normal person should have to drive! Nice Video and like the drag race at the end!
I know right :) Thank you, Sir ;)
21 - 25 of 25 Posts
Top